Roland Codes
Roland SP-300 Error Codes
Code | Description | Solution |
---|---|---|
0002 | Sub CPU Comms Error | Not recommended as DIY |
0101 | Limit position error | Will need to run limit initialise procedure. Call for guidance. |
0102 | Head lock sensor error | Not DIY |
0103 | Limit sensor error | Not DIY |
0104 | Cap unit protection error | Not DIY |
0105 | Tool carriage connection error | Not DIY |
0106 | Tool carriage disconnection error | Not DIY |
0107 | Linear encoder not setup error | Not DIY |
0109 | Wiper protection error | Check if wiper is jammed otherwise Not DIY |
0110 | Linear encoder error | Try carefully cleaning the linear encoder otherwise Not DIY |
0111 | Tool / crop error | Not DIY |
0120 | Thermistor error | Not DIY |
0121 | Thermistor error (dryer) | Not DIY |
0125 | Heater error | Not DIY |
0126 | Heater error (dryer) | Not DIY |
Roland SP-300V Error Codes
Code | Description | Solution |
---|---|---|
0002 | Sub CPU Comms Error | Not recommended as DIY |
0101 | Limit position error | Will need to run limit initialise procedure. Call for guidance. |
0102 | Head lock sensor error | Not DIY |
0103 | Limit sensor error | Not DIY |
0104 | Cap unit protection error | Not DIY |
0105 | Tool carriage connection error | Not DIY |
0106 | Tool carriage disconnection error | Not DIY |
0107 | Linear encoder not setup error | Not DIY |
0109 | Wiper protection error | Check if wiper is jammed otherwise Not DIY |
0110 | Linear encoder error | Try carefully cleaning the linear encoder otherwise Not DIY |
0111 | Tool / crop error | Not DIY |
0120 | Thermistor error | Not DIY |
0121 | Thermistor error (dryer) | Not DIY |
0125 | Heater error | Not DIY |
0126 | Heater error (dryer) | Not DIY |
Roland SP-540V Error Codes
Code | Description | Solution |
---|---|---|
0002 | Sub CPU Comms Error | Not recommended as DIY |
0003 | DIP switch error | Not DIY |
0101 | Limit position error | Will need to run limit initialise procedure. Call for guidance. |
0102 | Head lock sensor error | Not DIY |
0103 | Limit sensor error | Not DIY |
0104 | Cap unit protection error | Not DIY |
0105 | Tool carriage connection error | Not DIY |
0106 | Tool carriage disconnection error | Not DIY |
0107 | Linear encoder not setup error | Not DIY |
0109 | Wiper protection error | Check if wiper is jammed otherwise Not DIY |
0110 | Linear encoder error | Try carefully cleaning the linear encoder otherwise Not DIY |
0111 | Tool / crop error | Not DIY |
0120 | Thermistor error | Not DIY |
0121 | Thermistor error (dryer) | Not DIY |
0125 | Heater error | Not DIY |
0126 | Heater error (dryer) | Not DIY |
Roland VP-300 Error Codes
Code | Description | Solution |
---|---|---|
0002 | Sub CPU Comms error | Not recommended as DIY |
0004 | Sub CPU SRAM error | Not DIY |
0005 | Sub CPU download error | Not DIY |
0006 | Sub CPU Connection error | Not DIY |
0007 | Sub CPU transmission error | Not DIY |
0008 | Sub CPU serial Comms error | Not DIY |
0010 | Network I/F error | Not DIY |
0101 | Limit position error | Will need to run limit initialise procedure. Call for guidance. |
0102 | Head lock sensor error | Not DIY |
0103 | Limit sensor error | Not DIY |
0105 | Tool carriage connection error | Not DIY |
0106 | Tool carriage disconnection error | Not DIY |
0107 | Linear encoder not setup error | Not DIY |
0109 | Wiper protection error | Check if wiper is jammed otherwise Not DIY |
0110 | Linear encoder error | Try carefully cleaning the linear encoder otherwise Not DIY |
0111 | Tool / crop error | Not DIY |
0112 | Cartridge IC comms error | Not DIY |
0130 | Thermistor error | Not DIY |
0135 | Heater error | Not DIY |
0140 | Thermistor error (dryer) | Not DIY |
0145 | Heater error (dryer) | Not DIY |
Roland VP-540 Error Codes
Code | Description | Solution |
---|---|---|
0002 | Sub CPU Comms error | Not recommended as DIY |
0004 | Sub CPU SRAM error | Not DIY |
0005 | Sub CPU download error | Not DIY |
0006 | Sub CPU Connection error | Not DIY |
0007 | Sub CPU transmission error | Not DIY |
0008 | Sub CPU serial Comms error | Not DIY |
0010 | Network I/F error | Not DIY |
0101 | Limit position error | Will need to run limit initialise procedure. Call for guidance. |
0102 | Head lock sensor error | Not DIY |
0103 | Limit sensor error | Not DIY |
0105 | Tool carriage connection error | Not DIY |
0106 | Tool carriage disconnection error | Not DIY |
0107 | Linear encoder not setup error | Not DIY |
0109 | Wiper protection error | Check if wiper is jammed otherwise Not DIY |
0110 | Linear encoder error | Try carefully cleaning the linear encoder otherwise Not DIY |
0111 | Tool / crop error | Not DIY |
0112 | Cartridge IC comms error | Not DIY |
0130 | Thermistor error | Not DIY |
0135 | Heater error | Not DIY |
0140 | Thermistor error (dryer) | Not DIY |
0145 | Heater error (dryer) | Not DIY |